Comtrol SCO OpenServer Bedienungsanleitung PDF herunterladen (Seite 31)

Configuring Printers 31

SCO OpenServer

Testing Transparent Print

The following example uses an IBM InfoWindow II 3153 and an Epson

LQ-510 printer. Copy and adapt these procedures as needed.

The terminal is set up as follows:

emulation=wyse60

enhanced mode=on

commmode=full duplex

Host/Printer=EIA/None

EIAbaud=38400

AUXbaud=38400

EIAdata=8/1/N

AUXdata=8/1/N

1. Use a null-modem cable to connect the SES1-EIA port on the

terminal to RocketPort Board 1, Port 0 (ttyr0a).

2. Use a serial-to-parallel cable to connect the printer to the SES2-

AUX port on the terminal.

3. Verify that the driver has been installed with transparent print

feature enabled and a port speed of 38,400.

4. Disable /dev/ttyr0a.

5. Edit /comtrol/rckt/tprint.cfg and add the following lines:

device=tpr0a

auxon=(esc d #)

auxoff=(dc4)

printcps=90

option=onclr

6. Run /comtrol/rckt/psetup -t.

The program should return (test mode). If it does not, resolve the

error conditions and try again. Repeat until tprint.cfg is error-free.

7. Run /comtrol/rckt/psetup.

8. Enable /dev/ttyr0a.

9. Enter this command:

ls> /dev/tpr0a

This should print a listing of the present working directory on the

printer, without printing to the terminal screen.

10. If desired, print man pages, or cat text files to /dev/tpr0a to further

test the printer.

11. Login on the terminal and cat files to the printer. The terminal

should work without stopping while printing is in progress.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Keine Kommentare

Comtrol SCO OpenServer Bedienungsanleitung Seite 31