Comtrol RPSH Windows 2000 Bedienungsanleitung PDF herunterladen (Seite 11)

Configuring Device Properties 11

Configuring Device Properties

You can optionally configure the following Device

Properties:

• Verbose event log for diagnostic purposes.

• Scan rate to adjust latency for timing-critical

applications.

• Enable RS-485 mode.

Use the following procedure:

1. Access the

Main Setup

screen.

2. Select the Options tab.

3. Enable the features you want to use.

4. If you enable the RS-485 feature, an RS485 tab

appears behind the COM Port Properties tab that

you may need to configure.

Note: Use the Help button if you need detailed

information about procedures or use

context-sensitive help for any field.

Configuring Port Properties

You can also configure specific port properties for this

device:

• Override and lock baud rate

• Timeout on transmit data

• Map CD to DSR

• Map 2 stop bits to 1

• Wait on physical transmission

• Emulate modem hardware RING signal

• Clone all Comtrol ports for this server

•

Device Advisor

Use the following procedure to access the Port

Properties tab:

1. Access the

Main Setup

screen.

2. Highlight the port you want to configure and

select the Properties button.

3. Enable the features you want to use and select the

OK button. To configure all ports on the device

with the same features, select Clone.

Note: Use the Help button if you need detailed

information about procedures or use context-sensitive help for any field.

Adding Additional Devices

Install the device and use the Hardware wizard to install additional devices. If necessary, configure the ports.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

Comtrol RPSH Windows 2000 Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Comtrol RPSH Windows 2000